Order before 12 noon on Mon 22nd Dec for despatch before Xmas. Any orders placed after this will be despatched on our return on 5th of Jan. Xmas Hours: We are closed from 12 noon 23rd Dec and re-open 5th Jan.
This item, due to its size, incurs a surcharge by the courier. The surcharge is reflected in the postage price you see in your basket / checkout. Unfortunately we have no control over these costs.
WoodZone Dual Purpose Wood Preservative Concentrate is a professional-strength timber treatment designed to protect wood against both wood-boring insects and wood-destroying fungi. Using advanced micro-emulsion technology, this highly concentrated formula delivers superior penetration compared to traditional water-based preservative systems, providing long-lasting protection for internal and external timber.
Supplied as a compact 400g concentrate, each container makes up to 25 litres of ready-to-use preservative, reducing storage requirements, transport costs, and plastic waste. The solvent-free formulation is virtually odourless, non-flammable, and suitable for a wide range of timber preservation projects.
Special Features
Dual-purpose protection – treats both wood-boring insects and fungal decay
Super concentrate formula – 400g makes up to 25 litres of treatment solution
Note: Suitable for internal and external timber that is not in direct ground contact or permanently submerged in water.
Protection Against
Common Furniture Beetle (Woodworm)
Deathwatch Beetle
House Longhorn Beetle
Termites
Dry Rot (Serpula lacrymans)
Wet Rot Fungi
General Wood-Destroying Fungi
How It Works
The advanced micro-emulsion technology allows active ingredients to penetrate deeply into timber fibres where they provide long-term protection against insect attack and fungal decay.
Unlike traditional emulsified wood preservatives, the formulation forms a stable treatment solution that delivers enhanced penetration and more effective distribution throughout the timber structure
Mixing Instructions
Empty one 400g container into a suitable mixing vessel
Add clean water to make a total volume of 25 litres
Mix thoroughly before application
Prepared solution can be stored for up to 6 months if sealed correctly
Application
Apply only when temperatures are above 5°C
Ensure timber is reasonably dry before treatment
Remove paint, varnish, bark, and surface coatings before application
Apply by brush or low-pressure spray
Apply to refusal at approximately 1 litre per 3–4m²
Alternatively, timber may be immersed for up to 3 minutes
Coverage Guide
Brush or Spray Application: Approx. 3–4m² per litre